Introduction Of HX-2 Rendering Height To 4 M Auto Plastering
1. Plastering Machine Rack up mode, low running failure rate, light
weight magnesium-aluminum alloy material, light weight, appearance
car paint, machine life of more than 5 years, while using universal
universal wheel, durable, make the machine move Convenient.
2. The material of the plaster board is made of manganese steel
panel, which does not rust, deformation, oxidation, good steel and
long service life.
3. The motor automatically decelerates, automatically brakes, and
is equipped with a leakage protector to protect personnel during
4, Plastering Machine uses fully enclosed bearings, no sand, no
water, no rust, durable, aluminum bearing box, long-term contact
with water is not rust, durable.
5.Plastering Machine adopts split design, the main body box is
separated from the hopper and the scraping board. When the Plasting
Machine reaches the top, the hopper sinks and the scraping board
automatically turns, so that it can be painted to the top at the
same time. At the same time, when the machine is lowered, the
scraping is performed. Also smeared. No need to manually repair
6. With gantry support, the machine is positioned and fixed between
the ground and the top surface, which increases the stability of
the machine and thus increases the smoothness of the wall.
7. The Plastering Machine thickness adjustment mechanism is
designed, and the thickness adjustment is convenient and simple.
8. The high-frequency vibration device is installed on the hopper
and the scraping board respectively to achieve the vibration
pressure material, the vibration smear, the original road
calendering, so that there is no empty drum, cracks and the like.
Parameter Of HX-2 Rendering Height To 4 M Auto Plastering Machine
|Voltage||220v/380v or depends on you|
|Weight of the host||180KG|
Photos Of HX-2 Rendering Height To 4 M Auto Plastering Machine