Application Of ZB800-5A Plastering Machine For Wall
Wall Plastering Machine is also known as: Wall finishing machine.
It is a machine specially designed for wall plastering. A hoist
with a vertical gantry and a counter scraper frame is mounted on
the upper surface of the chassis, and a hopper above the chassis
and connected to the chassis is installed inside the two columns of
the scraper frame. The hopper can be slidably attached to the two
columns by the hoisting machine. One side of the gantry is provided
with a discharge opening on the upper façade of the hopper, and a
squeegee is mounted on the lower part of the discharge opening; in
the hopper, along the width direction thereof Supported by a dial
roller, the motor is connected to the dial by a speed reducer, and
the other end of the hopper is provided with a feed port.
Automatic plastering machine for wall is more suitable for
residential building ,office building, ground hardening houses
Automatic plastering machine for wall can be available for Concrete
brick wall, Cavity wall, Light body brick wall ,Baking-free brick
wall,etc.Using the ash contain white ash, stone powder, ash, cement
foamed cement mortar, gypsum,etc.
Automatic plastering machine for wall which the thickness of the
plaster is 0.3-30mm and the hight of the plaster is not higher than
5m will be OK.
Parameter Of ZB800-5A Plastering Machine For Wall
|Plastering Height||30cm-3.6 meters|
|Voltage/frequency||According to your demands|
Photos Of ZB800-5A Plastering Machine For Wall