Introduction Of ZB800-6A Automatic Wall Plaster Render Machine For
Wall Plastering Machine is also known as: Wall finishing machine.
It is a machine specially designed for wall plastering. A hoist
with a vertical gantry and a counter scraper frame is mounted on
the upper surface of the chassis, and a hopper above the chassis
and connected to the chassis is installed inside the two columns of
the scraper frame. The hopper can be slidably attached to the two
columns by the hoisting machine. One side of the gantry is provided
with a discharge opening on the upper façade of the hopper, and a
squeegee is mounted on the lower part of the discharge opening; in
the hopper, along the width direction thereof Supported by a dial
roller, the motor is connected to the dial by a speed reducer, and
the other end of the hopper is provided with a feed port.
Wall Plaster Render Machine is a machine that automatically
plasters the wall. The wall Plastering machine belongs to the field
of construction machinery. Its advantages and practicability are
strong. It saves time and effort in the construction of plaster
wall ash. It is easy to operate and has excellent engineering
quality, especially for workers who do not have any experience and
Wall Plaster Render Machine Methods Of Application:
1)assembly: firstly, you should accurately assembly the main box,
machine rack with electric box.
2)energized: switch the three-phrase power, and make sure that this
motor rotation is accurate. In the meantime, you should check the
switches, and be sure that the position of switches is in normal
3)straightening: move the machine very closely to the wall. Then
you turn the switch on, in this time, you can adjust the wiping
body according to the Vertical Situation Indicator, and make sure
that the angle of the wiping body is 90°.
4)filling: fill the plastering material stirred equally into the
5)construction: simultaneously turn the conveying switch, vibrating
switch and jack switch on, plastering wall starts.
6)dropping: it will stop automatically when the plastering body
reach the the topline, in this time, you should place the up-down
switch into the down position. Later on, the machine will execute
the downing program.
7)downing the jack: when the tank reaches the ground, you should
turn its switch on, and return the jack. At this time, one complete
action finish. Then, you can move the machine into next station,
and adjust the machine into accurate position, and repeat the
Parameter Of ZB800-6A Automatic Wall Plaster Render Machine For
|Plastering Height||0-3.6 meters|
|Voltage/frequency||According to your demands|
Photos Of ZB800-6A Automatic Wall Plaster Render Machine For Sale